Payment & Shipping Terms:
Automatic watering system is your first choice for different models of forklift battery(24v, 36v, 48v, 72v, 80v).
It makes the difficult task of watering industrial batteries easy. It consists of automatic shut-off valves interconnected with tubing that replace the existing vent caps. A quick coupling allows the system to be connected to a water supply. Once connected, water flows into each cell until it reaches the correct level. A flow indicator built into the water supply tells the operator when filling has been completed.
Characteristics of the Automatic watering system:
1. No need to water by hand, labor saving,
2. No malfunction factor leading to damage the battery.
3. Easy and safe operation.
4. Ensure a precise electrolyte level in every battery cell.
5. Prevent leakage when watering.
6. Effectively avoid the acid liquid to erode the storage battery.
7. Extend the service life of the battery.
8. Environment protection.
Application Specification & Installation
During the period of development and long-term practical usage, the leak tightness of Froetek automatic watering system has received complete recognition.
But when you use it, you need to keep the automatic watering system clean and there can’t be any filth on the surface.
How to properly install the automatic watering system of Froetek:
Our automatic watering system is easy to operate, no need to finish watering the electrolyte in the storage battery by hand, time saving and labor saving, besides, it can extend the service life.
How to correctly install the water tank, choose proper floaters, how to confirm the specification & quantity of the installed accessories according to different types of battery, including correct application rules for automatic watering plug, watering pipe, T/L-pieces and male/female couplings as well as the cleaning of the flow indicator.
We will give you a brief introduction for the above items as follows:
Meanwhile we will offer detailed installation drawings to ensure that the clients can correctly install and standardize the operation.
|Battery spec||Watering head||T-piece||Flow indicator||6mm watering pipe||10mm watering pipe||end plug||male/female K10||Water tank specification|
How to choose proper floaters correctly:
According to different storage battery, we have five kinds of floaters for you to choose. In order to achieve our expected standard and completely reflect the effectiveness of the automatic watering system, the most important thing is to choose proper floaters.
At present our company can offer a rule for the client to make judgment and choose the type of floater. (see diagram)
The diagram the installation way of the floaters:
Our company offers watering pipes of different types and the clients can choose what they need according to the specification of the battery.
The watering pipe must be perfectly sealed with T-piece and L-piece.
Notes during the filling process:
1．In order to ensure a safe watering process, we hereby recommend you to use flow indicator(with filter), the flow indicator with filter can not only timely indicate whether it finishes watering, but also avoid unclean impurities entering the battery to result interruption.
2．The watering pressure should be within the range of 0.2-0.6, no less than 200mbar.
3．You’d better conduct watering within the specified periods, because frequent filling will lead to overflowing for too much water, which will do great damage to the storage battery.
Note:Filling after finishing charging is the best ideal state, besides, do not filling before charging.